Starting The System On The Tcu/Mastermind Tcu; Handlebar Remote (Tcu) - CONCORD TURBO LEVO User Manual

8 . 3 . START I N G T HE SYST E M ON TH E TC U/M ASTE RM I ND TC U
8.3
Fig. 8.3 (TCU)
To start the system, press and hold the POWER button on the TCU display unit until the
„
horizontal LEDs glow blue.
To turn the battery (and support) off again, press and hold the POWER button until the
„
LEDs turn off.
Fig. 8.4 (MasterMind TCU)
To start the system, press and hold the POWER button on the MasterMind TCU until the
„
display turns on.
To power off the system, press the POWER button, and the display turns off.
„
If the system does not power on after a long period of non-use, remove the
MasterMind TCU from the top tube and charge the MasterMind TCU via a
TYPE C USB cable.
17
8.4
8 .4. HA NDLEBA R REM OT E ( TC U)
8.5
Fig. 8.5
The TCU handlebar remote is included on some Levo models and controls the level of motor
support.
A: (+)(-) Support adjustment buttons
„
B: Function Buttons, pressing and holding the lower function button activates the walk
„
assist mode.
C: Compression Screw (2 mm Hex key at 0.8 Nm / 7 in-lbf)
„