Swift MONZA CAMPERVAN Owner's Manual page 66

with the generator. Please note that some
electronic generators may not be compatible
with your leisure system.
b. Switch the Battery Charger / Power
Converter OFF
Locate the green 'Charger' power switch on
the MC200 and ensure the switch is in the off
position (button out) before connection to
the mains supply.
c. Connect the Hook-up Lead
Firstly, connect the supplied hook-up lead
(orange cable with blue connectors) to the
Leisure Vehicle and then connect to the
mains supply.
d. Check Residual Current Device operation
Locate the RCD within the MC200 and ensure
the RCD is switched on (lever in up position).
Press the 'Test' button and confirm that
the RCD turns off (lever in down position).
Switch the RCD back to the on position (lever
in up position).
e. Check Miniature Circuit Breakers
Locate the MCB's within the MC200
(adjacent to the RCD) and ensure they are all
in the on (up) position.
f. Turn the MC100 ON
Locate the black 'Shutdown' button and
ensure it is in the on position (press button
in). Locate the green 'Charger' switch on
the MC200 and turn to the on position (press
button in). The charger switch will illuminate
when turned on.
g. Check correct Polarity
Locate the 'Reverse polarity' indicator on the
MC200 and ensure that the indicator is NOT
illuminated.
h. Check operation of equipment
It is now safe to operate the 12V and 230V
equipment.
Operation while driving
The power control system is designed to
shutdown parts of the system while the engine
is running. This is to meet Electro Magnetic
Compatibility (EMC) regulations and to ensure
the safe operation of the campervan. With the
engine running the screen will show a warning
'ENGINE RUNNING'.
Please ensure the system shutdown switch
on the MC100 is in the on (button in) position
before driving. This will ensure the electronic
system is active and will therefore be able to
control the charging process and monitor other
system circuits.
65