1 Safety Instructions
When installing, commissioning, operating, and maintaining the product, strictly observe the
labels on the product and the safety requirements in the manual. Incorrect operation or work
may cause:
• Injury or death to the operator or a third party.
• Damage to the product and other properties.
WARNING
• Do not perform any operation on the product (including but not limited to,
handling, installing, powering on, or maintaining the product, performing
electrical connection, and working at heights) in harsh weather conditions,
such as thunder and lightning, rain, snow, and Level 6 or stronger winds.
SUNGROW shall not be held liable for any damage to the device due to force
majeure, such as earthquakes, floods, volcanic eruptions, mudslides, lightning
strikes, fires, wars, armed conflicts, typhoons, hurricanes, tornadoes, and other
extreme weathers.
• In case of fire, evacuate from the building or product area and call the
fire alarm. Re-entry into the burning area is strictly prohibited under any
circumstances.
NOTICE
• Tighten the screws with the specified torque using tools when fastening the
product and terminals. Otherwise, the product may be damaged. And the
damage caused is not covered by the warranty.
• Learn how to use tools correctly before using them to avoid hurting people or
damaging the device.
• Maintain the device with sufficient knowledge of this manual and use proper
tools.
1
Need help?
Do you have a question about the SH8.0RS and is the answer not in the manual?