Table of Contents
Advertisement
8 iSolarCloud App
NOTICE
In the Whole Home Backup scenario, feed-in limitation function can be achieved
without using a meter.
table 8-1 Description of feed-in limitation parameters
Parameter
Feed-in Limitation
Feed-in Limitation Value
Feed-in Limitation Ratio
Rated Power of Original Power
Generation Systems
8.5.2 Backup Mode
The backup mode is off by default, the user can set an amount of Reserved Battery SOC
for Off-Grid. It is the minimum battery level in the on-grid state and will be supplied to the
Backup loads in case of grid blackout.
8.6 Function Overview
The App provides parameter viewing and setting functions, as shown in the following figure.
8.7 Home
Home page of the App is shown in the following figure.
98
Default value
Off
Rated power
100.0%
Depends on inverter power of other companies
figure 8-4 App Function Tree Map
User Manual
Range
On / Off
0 ~ Rated power
0 ~ 100%
Advertisement
Table of Contents
Need help?
Do you have a question about the SH8.0RS and is the answer not in the manual?