Installation Safety; Electrical Connection Safety - Sungrow SH8.0RS User Manual

User Manual
NOTICE
After receiving the product, check whether the appearance and structural parts
of the device are damaged, and check whether the packing list is consistent with
the actual ordered product. If there are problems with the above inspection items,
do not install the device and contact your distributor first. If the problem persists,
contact SUNGROW in time.
1.2 Installation Safety
DANGER
• Make sure there is no electrical connection before installation.
• Before drilling, avoid the water and electricity wiring in the wall.
CAUTION
Improper installation may cause personal injury!
• If the product supports hoisting transport and is hoisted by hoisting tools, no
one is allowed to stay under the product.
• When moving the product, be aware of the product weight and keep the
balance to prevent it from tilting or falling.
NOTICE
Before operating the product, must check and ensure that tools to be used have
been maintained regularly.
1.3 Electrical Connection Safety
DANGER
Before electrical connections, please make sure that the inverter is not damaged,
otherwise it may cause danger!
Before electrical connections, please make sure that the inverter switch and all
switches connected to the inverter are set to "OFF", otherwise electric shock may
occur!
1 Safety Instructions
3