Safety Instructions - Sungrow SG110CX User Manual

1 Safety Instructions
When installing, commissioning, operating, and maintaining the product, strictly observe the
labels on the product and the safety requirements in the manual. Incorrect operation or work
may cause:
• Injury or death to the operator or a third party.
• Damage to the product and other properties.
WARNING
• Do not operate the product and cables (including but not limited to moving the
product, installing the product, operating the product and cables, powering up
the product, maintaining the product, and working at heights) in harsh weather
conditions such as flooding, lightning, rain, snow, and level 6 or stronger wind.
• In case of fire, evacuate from the building or product area and call the fire alarm.
Re-entry into the burning area is strictly prohibited under any circumstances.
NOTICE
• Tighten the screws with the specified torque using tools when fastening the prod­
uct and terminals. Otherwise, the product may be damaged. And the damage
caused is not covered by the warranty.
• Learn how to use tools correctly before using them to avoid hurting people or
damaging the device.
• Maintain the device with sufficient knowledge of this manual and use proper tools.
• The safety instructions in this manual are only supplements and cannot cover all
the precautions that should be followed. Perform operations considering actual
onsite conditions.
• SUNGROW shall not be held liable for any damage caused by violation of gen­
eral safety operation requirements, general safety standards, or any safety in­
struction in this manual.
• When installing, operating, and maintaining the product, comply with local laws
and regulations. The safety precautions in this manual are only supplements to
local laws and regulations.
1