Table of Contents
Advertisement
Safety Instructions
2
When installing, commissioning, operating, and maintaining the product, strictly observe the
labels on the product and the safety requirements in the manual. Incorrect operation or work
may cause:
•
Injury or death to the operator or a third party.
•
Damage to the product and other properties.
•
Do not perform any operation on the product (including but not limited to, han-
dling, installing, powering on, or maintaining the product, performing electrical
connection, and working at heights) in harsh weather conditions, such as thun-
der and lightning, rain, snow, and Level 6 or stronger winds. SUNGROW shall
not be held liable for any damage to the device due to force majeure, such as
earthquakes, floods, volcanic eruptions, mudslides, lightning strikes, fires,
wars, armed conflicts, typhoons, hurricanes, tornadoes, and other extreme
weathers.
•
In case of fire, evacuate from the building or product area and call the fire alarm.
Re-entry into the burning area is strictly prohibited under any circumstances.
•
To protect its internal components, during manufacture, after the product enclo-
sure is closed, sealant will be injected into the product. Do not disassemble the
product when using it. Forcible disassembly may damage the product, and the
losses caused therefrom will not be covered by warranty.
•
Tighten the screws with the specified torque using tools when fastening the
product and terminals. Otherwise, the product may be damaged. And the dam-
age caused is not covered by the warranty.
•
Learn how to use tools correctly before using them to avoid hurting people or
damaging the device.
•
Maintain the device with sufficient knowledge of this manual and use proper
tools.
3
Advertisement
Table of Contents
