Initial Settings; Feed-In Limitation - Sungrow SH8.0RS User Manual

User Manual
step 5 If the inverter is not initialized, navigate to the quick setting screen to initialize the protection
parameters. For details, please refer to "Initial Settings".
NOTICE
The "Country/Region" must be set to the country where the inverter is installed at.
Otherwise, the inverter may report errors.
step 6 After finishing the settings, tap TUNR ON DEVICE at the upper right corner and the device will
be initialized. The App will send start instructions and the device will start and operate.
step 7 After initialization settings, the App will return automatically to the home page.
- - End
8.5 Initial Settings

8.5.1 Feed-in Limitation

The function of the feed-in limitation is to control the amount of power injected in the grid
by the plant. In some situations，this function is also called as Export limitation or Zero
export. The feed-in limitation function requires the using of Smart Energy Meter. Without the
Smart Energy Meter, the feed-in limitation function will be unavailable.
figure 8-3 WLAN Local Access
8 iSolarCloud App
97