Advertisement
5. Slide KeyPad Plus onto the mounting plate and tighten the mounting screw at
the bottom of the body. The screw is needed for more reliable fastening and
protection of the keypad from quick dismantling.
. As soon as the keypad is fixed on the SmartBracket, it shall blink once with LED
X — this is a signal that the tamper has been triggered. If the LED does not blink
after installation on SmartBracket, check the tamper status in the Ajax app, and
then make sure the plate is firmly attached.
Maintenance
Check the functioning of your keypad on a regular basis. This can be done once or
twice a week. Clean the body from dust, cobwebs, and other contaminants as they
emerge. Use a soft dry cloth that is suitable for equipment care.
Do not use substances that contain alcohol, acetone, gasoline or other active
solvents to clean the detector. Wipe the touch keypad gently: scratches can reduce
Advertisement
Need help?
Do you have a question about the KeyPad Plus and is the answer not in the manual?
Questions and answers