AJAX KeyPad Plus User Manual page 25

2. Enter the general duress code.
3. Press the disarming button
For example: 4321 →
To use a personal duress code of registered user
1. Activate the keypad by swiping your hand over it. Bring Tag or Pass to the
keypad pass/tag reader if the Authorization confirmation with a passcode
feature is activated.
2. Enter the User ID.
3. Press the * (Function button).
4. Enter the personal duress code.
5. Press the disarming button
For example: 2 → * → 4422 →
To use a duress code of a person who is not registered in the system
Enter the duress code set in Keypad Access Codes and press the disarming key
For example: 4567 →
Using the RRU code
The RRU code is activated after triggering the alarm during the time configured in
the hub settings, and it is valid for a specified period. This ensures that such code
will only be used in case of risk, unlike keypad or user codes.
How to configure the RRU code
Security control of the object using the RRU code:
Enter RRU Code and press the arming
button.
For example: 1234 →
.
.
/ disarming / Night Mode activation
.