AJAX KeyPad Plus User Manual page 6

KeyPad Plus supports duress code. It allows you to simulate alarm deactivation. The
Ajax app and sirens
security company and other users of the security system will be warned about the
incident.
Learn more
Two-stage arming
KeyPad Plus can participate in two-stage arming, but cannot be used as a second-
stage device. The two-stage arming process using Tag or Pass is similar to arming
using a personal or general code on the keypad.
Learn more
Event transmission to the monitoring station
The Ajax system can connect to the CMS and transmit events and alarms to the
monitoring station of the security company in SurGard (Contact ID), ADEMCO 685,
SIA (DC-09), and other proprietary protocol formats. A complete list of supported
protocols is available here
found in its states .
Connection
KeyPad Plus is incompatible with Hub (2G) Jeweller, third-party security central units, and
ocBridge Plus and uartBridge integration modules.
Before starting connection
1. Install the Ajax app and
room.
2. Ensure that the hub is on and has Internet access (via Ethernet cable, Wi-Fi,
and/or mobile network). This can be done by opening the Ajax app or by looking
at the hub logo on the faceplate — it lights white or green if the hub is connected
to the network.
installed at the facility will not give you away in this case, but the
. The device ID and the number of the loop (zone) can be
create an account . Add a hub and create at least one