AJAX KeyPad Plus User Manual page 18

Delete Device
Entry and exit delays are set in the corresponding detector settings, not in the keypad settings.
Learn more about entry and exit delays
Configuring codes
Ajax system allows you to set up a keypad code, as well as personal codes for users
added to the hub.
With the OS Malevich 2.13.1
codes for people who are not added to the hub. This is convenient, for example, to
provide a cleaning company with access to security management.
With the OS Malevich 2.17 update, codes for the rapid response units are available.
The RRU codes are activated after the alarm and are valid for a specified period. See
how to set up and use each type of code below.
To set keypad code
1. Go to keyboard settings.
2. Select Keypad Code.
3. Set the keypad code you want.
To set the keypad duress code
1. Go to keypad settings.
2. Select Duress Code.
3. Set the keypad duress code you want.
armed mode is active. The device does not
execute system commands and does not
report alarms or other events.
Learn more
Disconnects KeyPad Plus from the hub and
deletes its settings.
update, we have also added the ability to create access