AJAX KeyPad Plus User Manual page 12

Permanent Deactivation
One-Time Deactivation
Firmware
Device ID
Device No.
Settings
KeyPad Plus is configured in the Ajax app:
1. Go to the Devices
2. Select KeyPad Plus from the list.
3. Go to Settings by clicking on the gear icon
Shows the status of the device:
Learn more
Shows the status of the keypad one-time
deactivation setting:
Learn more
KeyPad Plus firmware version.
Device identifier.
Number of the device loop (zone).
tab.
No — the device operates normally and
transmits all events.
Lid only — the hub admin has disabled
notifications about the body opening.
Entirely — the hub admin has entirely excluded
the keypad from the system. The device does
not execute system commands and does not
report alarms or other events.
No — the keypad operates in normal mode.
Lid only — notifications on the keypad tamper
triggering are disabled until the first disarm.
Entirely — the keypad is entirely excluded from
the operation of the system until the first
disarm. The device does not execute system
commands and does not report alarms or
other events.
.