AJAX KeyPad Plus User Manual page 11

Easy Armed Mode Change
This setting replaces Assigned
Group Easy Management on
KeyPad Plus Jeweller with firmware
version 5.60.7.0 or higher, operating
with hubs with
higher.
Shows the configuration for the Easy Armed Mode
Change feature:
Off — each arming or disarming attempt
should be confirmed by entering the passcode
or presenting the access device.
Arm/disarm using access device without
confirming action by buttons — allows users to
switch security modes of the system using
access devices without confirmation by
pressing keypad buttons.
Disarm without disarming button — the system
or its groups, the security of which is managed
with a passcode or access devices, will be
disarmed without confirmation by pressing
keypad buttons.
A fixed passcode length should be
set in the hub settings in the Ajax
PRO app.
OS Malevich 2.19 or