AJAX KeyPad Plus User Manual page 16

Arming without Code
Auto-wake on Delay when Entering
Allows users to arm/disarm the system without
confirmation by pressing keypad buttons.
Three options are available:
Off — each arming or disarming attempt
should be confirmed by entering the passcode
or presenting the access device.
Arm/disarm using access device without
confirming action by buttons — allows users to
switch security modes of the system using
access devices without confirmation with
keypad buttons.
Disarm without disarming button — the system
or its groups, the security of which is managed
with a passcode or access devices, will be
disarmed without confirmation by pressing
keypad buttons.
A fixed passcode length should be
set in the hub settings in the Ajax
PRO app.
The option allows you to arm the system without
entering a code. To do so, just click on the
or Night Mode button.
The feature is available on KeyPad
Plus Jeweller with firmware version
5.60.7.0 or higher, operating with
hubs with OS Malevich 2.19
higher.
Activates the keypad after
Entering
is started by any security device.
The auto-wake feature may also reduce the keypad
battery life.
Arm
or
Delay When