Mac Notification Settings; Mac Notification Global Settings - D-Link DGS-3700 Series User Manual

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
From :Which Week
of the Month
From: Day of the
Week
From: Month
From: Time in
HH:MM
To: Which Week of
the Month
To: Day of the
Week
To: Month
To:Time in HH:MM
Using annual mode will enable DST seasonal time adjustment. Annual mode requires that the DST beginning and
ending date be specified concisely. For example, specify to begin DST on April 3 and end DST on October 14.
From: Month
From: Day
From: Time in
HH:MM
To: Month
To: Day
To: Time in HH:MM
Click Apply to implement changes made to the Time Zone and DST window.

MAC Notification Settings

MAC Notification is used to monitor MAC addresses learned and entered into the forwarding database. To globally set
MAC notification on the Switch, open the following window by opening the MAC Notification Settings in the
Configuration folder.

MAC Notification Global Settings

This window is used to configure the MAC Notification Global Settings for the Switch.
To view this window, click Configuration > MAC Notification Settings > MAC Notification Global Settings as
shown below:
Enter the week of the month that DST will start.
Enter the day of the week that DST will start on.
Enter the month DST will start on.
Enter the time of day that DST will start on.
Enter the week of the month the DST will end.
Enter the day of the week that DST will end.
Enter the month that DST will end.
Enter the time DST will end.
Enter the month DST will start on, each year.
Enter the day of the week DST will start on, each year.
Enter the time of day DST will start on, each year.
Enter the month DST will end on, each year.
Enter the date DST will end on, each year.
Enter the time of day that DST will end on, each year.
DST Annual Settings
38