Mac-Based Access Control Local Settings - D-Link DGS-3700 Series User Manual

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
Hold Time (1-300)
Click Apply to implement changes.

MAC-based Access Control Local Settings

The following window is used to set a list of MAC addresses, along with their corresponding target VLAN, which will be
authenticated for the Switch. Once a queried MAC address is matched in this table, it will be placed in the VLAN
associated with it here. The switch administrator may enter up to 128 MAC addresses to be authenticated using the
local method configured here.
To view this window, click Security > MAC-based Access Control > MAC-based Access Control Local Settings
as shown below:
To add a MAC address to the local authentication list, enter the MAC address and the target VLAN name into their
appropriate fields and click Apply. To change a MAC address or a VLAN in the list, click the corresponding Edit
button. To delete a MAC address entry, enter its parameters into the appropriate fields and click Delete By MAC, to
delete a VLAN, enter its parameters into the appropriate fields and click Delete By VLAN. To search for a MAC or a
VLAN enter the information in the appropriate fields and click Find By MAC or Find By VLAN.
unauthenticated state. The range is between 1 and 1440 minutes. The default is
1440.
If a host fails to pass authentication, the next authentication will not started within hold
time unless the user clears the entry state manually. The default is 300.
Figure 5 - 45 MAC-based Access Control Local MAC Settings
182