802.1X Global Settings; 802.1X Port Settings - D-Link DGS-3700 Series User Manual

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

802.1X Global Settings

This window is used to configure the 802.1X Global Settings on the Switch.
To view this window, click Security > 802.1X > 802.1X Global Settings as shown below:
This window allows you to set the following features:
Parameter Description
Authentication The Authentication Mode allows the user to choose among, Disabled, Port Based or MAC
Mode Based Authentication Mode. When choosing MAC Based, Host-based Network Access Control
will be enabled on the port.
Authentication Choose the Authentication Protocol either RADIUS EAP or Local.
Protocol
Forward EAPOL This enables or disables the Switch retransmit EAPOL PDU Request.
PDU
Max User (1-
Specify the maximum number of users that can be learned via 802.1X authentication.
1536)
Click Apply to implement your configuration changes.

802.1X Port Settings

This window is used to configure the 802.1X Port Settings.
To view this window, click Security > 802.1X > 802.1X Port Settings as shown below:
Figure 5 - 22 802.1X Global Settings window
Figure 5 - 23 802.1X Port Settings window
160