Qos Scheduling - D-Link DGS-3700 Series User Manual

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
The following parameters can be configured.
Parameter
From Port / To Port
Scheduling
Mechanism
Click Apply to implement changes made.

QoS Scheduling

This window allows the user to configure the way the Switch will map an incoming packet per port based on its 802.1p
user priority, to one of the eight available hardware priority queues available on the Switch.
To view this window, click QoS > QoS Scheduling as shown below:
Figure 4 - 7 QoS Scheduling Mechanism
Description
Enter the port or port list you wish to configure.
Strict – The highest class of service is the first to process traffic. That is, the highest class of
service will finish before other queues empty.
Weighted Round Robin – Use the weighted round-robin (WRR) algorithm to handle packets
in an even distribution in priority classes of service. For weighted round-robin queuing, the
number of packets sent from each priority queue depends upon the assigned weight.
138