Browse Historical Utilization; System Log - D-Link DGS-3700 Series User Manual

Layer 2 managed gigabit ethernet switch
Hide thumbs Also See for DGS-3700 Series:
Table of Contents

Advertisement

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

Browse Historical Utilization

This window displays information regarding the historical utilization of the CPU and memory. The counters are set up
in 15 minute and one day intervals. There is a maximum of five 15 minute historical utilization entries supported for
each port, with one being the most recent 15 minutes of data. The Switch also displays utilization information based
on a per day basis, with a maximum of two historical statistic entries supported.
To view this window, click Monitoring > Historical Counter & Utilization > Browse Historical Utilization as shown
below:
The following parameters may be configured:
Parameter
Description
CPU/Memory
Specify CPU or Memory to display the historical utilization information.
15 Minutes/1 Day
Choose whether to view information relating to 15 minute intervals or 1 day intervals.
15 Minutes – Specifies historical utilization information based on 15 minute intervals.
1 Day – Specifies historical utilization information based on one day intervals.
Slot 1-5
Specifies the slot number to display.
1-5 – Specifes that the 15 minute intervals will be displayed in chronological order with 1 being
the most recent.
1-2 – Specifies that the daily intervals will be displayed in chronological order with 1 being the
most recent.
Enter the appropriate information and click Find the information will be displayed in the CPU Utilization table.

System Log

This window is used to view the Switch's history log, as compiled by the Switch's management agent.
To view this window, click Monitoring > System Log as shown below:
The Switch can record event information in its own logs, to designated SNMP trap receiving stations, and to the PC
connected to the console manager. Click Next to go to the next page of the System Log window. Clicking Clear Log
will allow the user to clear the Switch History Log.
The information in the table is categorized as:
Figure 7 - 48 Browse Historical Utilization window
Figure 7 - 49 System Log window
253

Advertisement

Table of Contents
loading

Table of Contents