Ipv6 Multicast Profile Settings - D-Link DGS-3700 Series User Manual

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
Tagged Member
Select the ports that will be tagged as members of the VLAN.
Port (e.g.:1-4,6)
To modify an entry click the corresponding Modify button. To remove an entry click the corresponding Delete button.

IPv6 Multicast Profile Settings

The IPv6 Multicast Profile Settings window allows the user to add a profile to which multicast IPv6 address(es)
reports are to be received on specified ports or VLANs on the Switch. This function will therefore limit the number of
reports received and the number of multicast groups configured on the Switch. The user may set an IP Multicast
address or range of IPv6 Multicast addresses to accept reports (Permit) or deny reports (Deny) coming into the
specified switch ports or VLANs.
To view this window, click L2 Features > MLD Snooping > IPv6 Multicast Profile Settings as shown below:
The following fields can be set:
Parameter Description
Profile ID Use the drop-down menu to choose a Profile ID.
Profile Name
Enter a name for the IPv6 Multicast Profile.
To edit an entry click the corresponding Edit button and to delete an entry, click the corresponding Delete button.
To configure the Group List Settings click the hyperlinked
Figure 3 - 52 Multicast Address Group List Settings – Group List window
Enter the multicast Address List starting with the lowest in the range, and click Add. To return to the IP Multicast
Profile Settings window, click the <<Back button.
Figure 3 - 50 IPv6 Multicast Profile Settings window
Figure 3 - 51 IPv6 Multicast Profile Settings – Edit window
Group List.
103