Valid Port Settings On Omniswitch 6850 Series Switches - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Ethernet Ports Overview
Chassis Type
(Port Nos.)
OmniSwitch 6800-48
(ports 49–50)
See the OmniSwitch 6800 Series Hardware Users Guide for more information about the OmniSwitch 6800
hardware that is supported in the current release.

Valid Port Settings on OmniSwitch 6850 Series Switches

This table below lists valid speed, duplex, and autonegotiation settings for the different OmniSwitch 6850
Series port types.
Chassis Type
(Port Nos.)
OmniSwitch 6850-24
(ports 1–20)
OmniSwitch 6850-24
(ports 21–24)
OmniSwitch 6850-24
(ports 25–26)
OmniSwitch 6850-48
(ports 5–48)
OmniSwitch 6850-48
(ports 1–4)
OmniSwitch 6850-48
(ports 49–50)
OmniSwitch 6850-U24X
(ports 1–22)
OmniSwitch 6850-U24X
(ports 23–24)
OmniSwitch 6850-U24X
(ports 25–26)
See the OmniSwitch 6850 Series Hardware Users Guide for more information about the OmniSwitch 6850
hardware that is supported in the current release.
page 1-6
Port Type User-Specified
Port Speed
(Mbps)
Supported
Fiber XFP 10000
Port Type User-Specified
Port Speed
(Mbps)
Supported
Non-combo RJ-45 auto/10/100/
1000
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
Fiber XFP 10000
Non-combo RJ-45 auto/10/100/
1000
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
Fiber XFP 10000
Non-combo SFP Dependent
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
Fiber XFP 10000
OmniSwitch AOS Release 6 Network Configuration Guide
Configuring Ethernet Ports
User-Specified Auto
Duplex Negotiation
Supported Supported?
full No
User-Specified Auto
Duplex Negotiation
Supported Supported?
auto/full/half Yes
RJ-45: auto/full/ RJ-45: Yes
half SFP: Dependent
SFP: Dependent
full No
auto/full/half Yes
RJ-45: auto/full/ RJ-45: Yes
half SFP: Dependent
SFP: Dependent
full No
Dependent Dependent
RJ-45: auto/full/ RJ-45: Yes
half SFP: Dependent
SFP: Dependent
full No
September 2009