Valid Port Settings On Omniswitch 6400 Series Switches; Valid Port Settings On Omniswitch 6800 Series Switches - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Configuring Ethernet Ports

Valid Port Settings on OmniSwitch 6400 Series Switches

This table below lists valid speed, duplex, and autonegotiation settings for the different OmniSwitch 6400
Series port types.
Chassis Type
(Port Nos.)
OmniSwitch 6400-24/P24
(ports 1-4)
OmniSwitch 6400-24/P24
(ports 5-24)
OmniSwitch 6400-48/P48
(ports 1-4)
OmniSwitch 6400-48/P48
(ports 5-48)
OmniSwitch 6400-U24/
U24D
(ports 1-2)
OmniSwitch 6400-U24/
U24D (ports 3-24)
See the OmniSwitch 6400 Series Hardware Users Guide for more information about the OmniSwitch
6400 hardware that is supported in the current release.

Valid Port Settings on OmniSwitch 6800 Series Switches

This table below lists valid speed, duplex, and autonegotiation settings for the different OmniSwitch 6800
Series port types.
Chassis Type
(Port Nos.)
OmniSwitch 6800-24
(ports 1–20)
OmniSwitch 6800-24
(ports 21–24)
OmniSwitch 6800-48
(ports 1–44)
OmniSwitch 6800-48
(ports 45–48)
OmniSwitch AOS Release 6 Network Configuration Guide
Port Type User-Specified
Port Speed
(Mbps)
Supported
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
Non-Combo RJ-45 auto/10/100/
1000
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
Non-Combo RJ-45 auto/10/100/
1000
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
Non-Combo SFP Dependent
Port Type User-Specified
Port Speed
(Mbps)
Supported
Non-combo RJ-45 auto/10/100/
1000
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
Non-combo RJ-45 auto/10/100/
1000
Combo RJ-45/SFP RJ-45: auto/10/
100/1000
SFP: Dependent
September 2009
Ethernet Ports Overview
User-Specified Auto
Duplex Negotiation
Supported Supported?
RJ-45: auto/full/ RJ-45: Yes
half SFP: Dependent
SFP: Dependent
auto/full/half Yes
RJ-45: auto/full/ RJ-45: Yes
half SFP: Dependent
SFP: Dependent
auto/full/half Yes
RJ-45: auto/full/ RJ-45: Yes
half SFP: Dependent
SFP: Dependent
Dependent Dependent
User-Specified Auto
Duplex Negotiation
Supported Supported?
auto/full/half Yes
RJ-45: auto/full/ RJ-45: Yes
half SFP: Dependent
SFP: Dependent
auto/full/half Yes
RJ-45: auto/full/ RJ-45: Yes
half SFP: Dependent
SFP: Dependent
page 1-5