Verifying The Mst Configuration - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Using 802.1Q 2005 Multiple Spanning Tree

Verifying the MST Configuration

To display information about the MST configuration on the switch, use the show commands listed below:
show spantree cist
show spantree msti
show spantree cist ports
show spantree msti ports
show spantree mst region
show spantree cist vlan-map
show spantree msti vlan-map
show spantree map-msti
show spantree mst port
For more information about the resulting displays from these commands, see the OmniSwitch CLI Refer-
ence Guide.
OmniSwitch AOS Release 6 Network Configuration Guide
Displays the Spanning Tree bridge configuration for the flat mode Com-
mon and Internal Spanning Tree (CIST) instance.
Displays Spanning Tree bridge information for a Multiple Spanning
Tree Instance (MSTI).
Displays Spanning Tree port information for the flat mode Common and
Internal Spanning Tree (CIST) instance.
Displays Spanning Tree port information for a flat mode Multiple Span-
ning Tree Instance (MSTI).
Displays the Multiple Spanning Tree (MST) region information for the
switch.
Displays the range of VLANs associated with the flat mode Common
and Internal Spanning Tree (CIST) instance.
Displays the range of VLANs associated with the specified Multiple
Spanning Tree Instance (MSTI).
Displays the Multiple Spanning Tree Instance (MSTI) that is associated
to the specified VLAN.
Displays a summary of Spanning Tree connection information and
instance associations for the specified port or a link aggregate of ports.
September 2009
Verifying the MST Configuration
page 12-19