Vlan Rules Overview; Vlan Rule Types - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Software release 6
Hide thumbs Also See for OmniSwitch 6850-48:
Table of Contents

Advertisement

VLAN Rules Overview

VLAN Rules Overview
The mobile port feature available on the switch allows dynamic VLAN port assignment based on VLAN
rules that are applied to mobile port traffic.When a port is defined as a mobile port, switch software
compares traffic coming in on that port with configured VLAN rules. If any of the mobile port traffic
matches any of the VLAN rules, the port and the matching traffic become a member of that VLAN.
VLANs do not have a mobile or non-mobile distinction and there is no overall switch setting to invoke the
mobile port feature. Instead, mobility is enabled on individual switch ports and rules are defined for indi-
vidual VLANs to capture mobile port traffic. Refer to
information about using mobile ports and dynamic VLAN port assignments.

VLAN Rule Types

There are several types of configurable VLAN rules available for classifying different types of network
device traffic. There is no limit to the number of rules allowed per VLAN and up to 8,129 of each rule
type is allowed per switch. See
how to create a VLAN rule.
The type of rule defined determines the type of traffic that will trigger a dynamic port assignment to the
VLAN and the type of traffic the VLAN will forward within its domain. Refer to the following sections
(listed in the order of rule precedence) for a description of each type of VLAN rule:
Rule
DHCP MAC Address
DHCP MAC Range
DHCP Port
DHCP Generic
MAC-Port-IP Address Binding
MAC-Port Binding
Port-Protocol Binding
MAC Address
MAC Address Range
Network Address
Protocol
Port
Use the
show vlan rules
information about this command, refer to the OmniSwitch CLI Reference Guide.
page 8-4
"Configuring VLAN Rule Definitions" on page 8-10
See
"DHCP Rules" on page 8-5
"Binding Rules" on page 8-6
"MAC Address Rules" on page 8-6
"Network Address Rules" on page 8-6
"Protocol Rules" on page 8-6
"Port Rules" on page 8-7
command to display a list of rules already configured on the switch. For more
OmniSwitch AOS Release 6 Network Configuration Guide
Chapter 6, "Assigning Ports to VLANs,"
Defining VLAN Rules
for more
for instructions on
September 2009

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents