7.11.2 Setting The User Lu - Acer HDS WMS100 Reference Manual

7.11.2 Setting the User LU

To set the User LU:
8. On the Unit screen, click the Logical Status tab.
9. Display the NNCO/2 by double-clicking the NAS.
Display the System and User by double-clicking the NNCO/2, and select the User.
A list of system LU is displayed.
10. Click the Set button in the lower right portion of the screen.
The User LU dialog box is displayed.
11. Select one H-LUN from the H-LUN list in the User LU dialog box, select an LUN that you
want to assign for the H-LUN from the Available Logical Units list, and click
button.
Acer | HDS WMS100™ User and Reference Guide 157