Table of Contents
Advertisement
6. When a message dialog box displays confirming the system parameter information is
output with the specified file name, click OK:
System parameter information is saved in the form of a text file with the specified file name.
7.6.2
RAID Group/LU information
To output the RAID group/logical unit definition information already set in an array unit to a
specified file in a text format:
1. From the Tools menu, select Configuration Settings or click Configuration Settings on
the toolbar.
2. Click the Constitute tab.
3. Check the RAID Group/Logical Unit in the Select Configuration Information box:
4. Click Browse, and then specify the directory and file name to output the file of the
configuration.
5. Click Apply.
138
Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem
Advertisement
Table of Contents
Troubleshooting
