Detailed Setting - Acer HDS WMS100 Reference Manual

7.8.2

Detailed Setting

This operation is performed using the Storage Navigator Modular.
The following describes the procedure for setting a subsystem when the host group option
setting is required for a combination that simple setting does not have.
Follow these steps:
1. On the unit window, click the Logical Status tab.
2. Double-click the Host Groups. Display 000:G000 by double-click the Port which you want
to set for the connection mode with the host.
3. Display the Option and Logical Unit by double-clicking 000:G000, and then select the
Option:
4. Select the Detail Setting button.
Perform the operation corresponding to the model to be set.
5. Execute the settings for other ports using the same procedure described above.
150 Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem