Warning Messages - Acer HDS WMS100 Reference Manual

Table 8.8 Progress Messages (continued)
Message Code
IA2V00
Note1)
(
IA3000
Note1)
(
IA3300
Note1)
(
IA3400
Note1)
(
IA3900
Note1)
(
Note1: After getting rid of the failure, execute it according to "8.3.7 Clear Specified Factors
of NNC Partial Alarm". When a Progress message other than those shown above is displayed,
inform your Customer Engineer of the message code.
Note2: When a Progress message other than those shown above is displayed, inform your
Customer Engineer of the message code.
8.4.5.4

Warning Messages

When the following Warning messages are displayed, follow the instructions to resolve the
problem.
Table 8.9 Warning Messages
Message Code
W03200
When a Warning messages other than those shown above is displayed, inform your Customer
Engineer of the message code.
Message Text
NNC Some integrated link of Data
LAN failed [xy] (NNC-z)
NNC can not synchronize with NTP
server [xy] (NNC-z)
NNC Fibre Channel failure detected
in backup interface [xy] (NNC-z)
NNC I/O error detected in backup
interface [xy] (NNC-z)
NNC Link down in Data LAN [xy]
(NNC-z)
Message Text
Battery SW off
Acer | HDS WMS100™ User and Reference Guide
Recovery Measures
Identify failed part by checking the LED beside the data LAN
port. Confirm if the LAN cable is firmly connected to the LAN
port and if there is no failure in network switch. If there are
some failures, get rid of them.
Check the NTP server settings and network configuration, and
then change them if necessary.
Check if the backup device is firmly connected to the NNC
(NAS Unit) displayed in this message. If the backup device is
not connected firmly, reconnect it firmly.
Identify failed part by checking the LED beside the data LAN
port. Confirm if the LAN cable is firmly connected to the LAN
port and if there is no failure in network switch. If there are
some failures, get rid of them.
Recovery Measures
Turn on the battery unit switch.
211