Table of Contents
Advertisement
7.6.3
Port/Host Group Information
This setting is not required for the NAS system.
To output Port/Host group definition information previously set in an array unit to a
specified file in a text format:
1. From the Tools menu, select Configuration Settings or click Configuration Settings on
the toolbar.
2. Click the Constitute tab.
3. Check the Port/Host Group in the Select Configuration Information box:
4. Click Browse, and then specify the directory and file name to output the file of the
configuration for the File.
5. Click Apply.
6. A message box displays confirming the system parameter information is output with the
specified file name. Click OK:
Port/Host group information is saved in the form of a text file with the specified file name.
140
Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem
Advertisement
Table of Contents
Troubleshooting
