Deleting The Last Logical Unit - Acer HDS WMS100 Reference Manual

7.3.6

Deleting the Last Logical Unit

To delete the last logical unit, follow these steps:
1. Click the Logical Status tab on the Unit window.
2. From the Unit window, select the icon of logical unit to be deleted.
3. On the Settings menu, select Logical Unit and click Delete.
Note 1: The logical units being used in the NAS system may be unable to be deleted.
Note 2: The logical units defined below cannot be deleted. Release all the LUs from the
definition and then delete the RAID group.
Command device
DMLU
Paired LU of the ShadowImage in-system replication
Paired LU of the Copy-on-write SnapShot
Pooled LU of the Copy-on-write SnapShot
Paired LU of the TureCopy remote replication
SubLU of the Unified LU
NAS system LU
NAS user LU
4. A confirmation message displays indicating whether selected logical units should be
deleted or not. Depending on whether the logical units to be deleted are formatted or
not, the message description is different. Click OK.
The logical unit information in which the logical unit has been deleted is updated and a
window is displayed.
–
When no formatted logical unit exists:
Acer | HDS WMS100™ User and Reference Guide 123