Figure 7.7 Setting The Logical Unit Dialog Box - Acer HDS WMS100 Reference Manual

5. Click the icon of a RAID group from which you would like to create the Logical Unit.
On the Settings menu, select Logical Unit and click Settings. Alternately, click Logical
Unit Settings on the tool bar.
This operation can also be completed from the context menu of the Logical Unit dialog
box. The Logical Unit dialog box displays.
6. On the Logical Unit dialog box, enter or select Logical Unit No., Default Controller, and
Size. Click OK.
7. A created logical unit number displays for the Logical Unit No. and the RAID group
number in which logical units are defined for the RAID Group. Additionally, a logical unit
capacity that can be created displays.
Note: To specify a size explicitly in figures, select a unit to specify the size from among
the GB, MB, and Block. Specify the size to be allocated in decimal number.
The subsystem can be divided into a maximum of 512 logical units.
Note: The logical unit number may be set optionally when the logical unit is created.
However, the logical unit number 0 is assigned to the logical unit created first.
8. After the setting is complete, click OK.
9. The set logical unit information is updated and the window displays.
Figure 7.7 Setting the Logical Unit Dialog Box
122 Chapter 7 Configuring Storage on the Thunder 9530™ V Series Subsystem