Setting The Supervisor/User Password - Acer Altos G320 Series User Manual

64
Parameter
Expansion
Card Text
Chassis
Intrusion
XD
Technology

Setting the Supervisor/User password:

1 Use the up/down keys to highlight a password parameter
(Supervisor Password or User Password), then press Enter.
A password box will appear.
2 Type a password then press Enter.
The password may consist of up to six alphanumeric characters
(A-Z, a-z, 0-9).
3 Retype the password to verify the first entry, then press Enter
again.
After setting the password, the system automatically sets the
chosen password parameter to Installed.
Removing the User password
1 Use the up/down keys to highlight the Clear User Password
parameter, then press Enter.
2 Enter the current password, then press Enter.
3 Press Enter twice without entering anything in the new and
confirm password fields.
After doing this, the system automatically sets the User password
parameter to Not Installed.
Description
N/A
Enables or disables the system to detect
and report chassis intrusion events
Enables or disables the execute disable
bit technology functionality.
4 BIOS setup
Option
Disable
Enable
Enable
Disable
Enable
Disable