Rear Panel Features - Extron electronics SW USB Pro Series User Manual

Rear Panel Features

HOSTS
SS 10G
1
POWER
12V
1.6A MAX
USB-C USB-C
A A A B B B
Figure 4. Rear Panel — SW2 USB Pro
1
POWER
12V
1.6A MAX
USB-C USB-C
B B B
A A A
Figure 5. Rear Panel — SW4 USB Pro
2-pole DC Power Connector
A
USB‑C Host Connectors
B
USB Type B Host Connectors (SW4 USB Pro only)
C
Device 1 — USB-C Connector for USB 3.2, 2.0, and 1.x
D
Device 2 — USB Type A connector for USB 3.2, 2.0, and 1.x
E
DC power connector — Attach the provided external 12 VDC power supply to this 2-pole, 3.5 mm captive
A
screw connector for DC power.
USB‑C host connectors — Connect host devices to these two female USB type C connectors for data
B
transfer.
NOTE: The USB-C host ports do not provide power to the connected host PCs.
USB-B host connectors (SW4 USB Pro only) — Connect PCs or other host devices to these two female USB
C
type B connectors for USB 3.0 input.
through
D F
storage drives) to these female USB connectors. These connectors provide power to the connected devices
as described below:
Device 1 — USB-C. This port provides 5 V, 1.5 A power, which is enough to keep live a USB-C device
D
connected to it, but not to charge the device.
Device 2 — USB Type A connector for USB 3.0 (blue). This port provides up to 5 V, 900 mA power.
E
Devices 3 and 4 — USB Type A connectors for USB 2.0 (HIDs only). Each of these ports provides up to 5 V,
F
100 mA power.
NOTES:
•
If your SW USB Pro system contains multiple computers, drivers for all connected peripheral
devices should be loaded on all computers.
• The outputs act as a USB hub. Hosts cannot be routed to specific USB Device connectors. All
devices are simultaneously connected to the selected host.
2
1.5A
USB-C
D D D
HOSTS
SS 10G
2 3 4
1.5A
USB-C
C C C D D D
— USB output hub: Connect USB devices and HIDs (peripherals such as keyboards, mice, or
DEVICES REMOTE
SS 10G USB HID
1 2
3
900 mA RS-232
4
100 mA
Tx Rx G
E E E F F F G G G
DEVICES REMOTE
SS 10G USB HID
2
1
3
RS-232
900 mA
4
100 mA
Tx Rx G
F F F
E E E G G G
SW2 USB PRO
LAN
R
H H H I I I
SW4 USB PRO
LAN
R
H H H I I I
Devices 3 and 4 — USB Type A
F
Connectors for USB 2.0 and 1.x
Remote RS‑232 port
G
LAN Connector
H
Reset (R) button and LED
I
SW USB Pro Series • Installation 5