Extron electronics SW USB Pro Series User Manual page 43

2. Click the Firmware link (see
Figure 26. S Link on Firmware Download Center Page
3. On the
Download Center
4. Ensure the available firmware version is a later version than the current one on the device.
NOTE: The firmware release notes provide details about the changes between different firmware versions.
The file can be downloaded from the same page as the firmware.
5. Click the Download link to the right of the desired device (
6. On the login page that appears next, fill in the required information to log in to
an Insider Account, see your Extron representative).
7. Follow the instructions on the subsequent screens to complete the software program installation. By default,
the configuration program file is stored on your computer in the Downloads folder at
there, you can move it to a desired storage location on your C: drive.
figure 25, on the previous page) in the
2
screen, click the S link (see figure 26,
Downloads
).
1
).
2
www.extron.com
SW USB Pro Series • Reference Information
column.
(if you need
. From
\Desktop\This PC
35 35 35