Axis 2N Analog Force Installation Manual page 23

Gooseneck Stand Mounting
Gooseneck stand mounting is used at gates.
What you need:
Gooseneck Stand, Part No. 9151005
Screws (depending on the surface material) - screws are not a part of delivery
Caution
It is necessary to properly fix gooseneck stand to the surface, especially
where vandals may destroy the unit (in public garages, e.g.). We
recommend to use steel fixing elements.
Connect the grounding
1.
Pull the wires through the stand
2.
Fix the stand to the surface. Dimensions for the holes are in the Mounting
3.
template . Screws are not a part of delivery. Use your own according to the
surface.
Use cable bushing to pull wires to
4.
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N Analog IP Force !
23/78