Axis 2N Analog Force Installation Manual page 65

How does switching work?
Every button has memories for 6 numbers (intended primarily for Automatic
Multiple Number Dialling).
If the Automatic Multiple Number Dialling mode is
Day mode and memory
switching.
If the Automatic Multiple Number Dialling mode is
are used for the Day mode and memories
in the above-mentioned order. This accelerates the process; numbers that would
not be answered are skipped over.
If the Night mode is on and memories 3 to 6 are empty, memories 1 and 2 are
used.
If the Night mode is on, memories 1 and 2 are omitted for
cannot be disabled individually using the Arrival function.
In the Day mode, the buttons assigned to persons who used the Departure
function (are on a leave) shall remain in the Night mode until the same persons
use the Arrival function (after the leave, e.g.).
Example 1 – administration building, automatic dialling is off:
Button 01: labelled Mr. Smith, memory 1 = Mr. Smith's line, memory 3 – secretary's line,
password for button 01 is 777.
Mr. Smith is leaving for holiday. He calls the intercom
1.
A visitor comes, presses Mr. Smith's button – the intercom calls the secretary.
2.
Mr. Smith comes back. He calls the intercom
3.
Example 2 – family house, Silent Automatic Multiple Number Dialling:
Button 01: labelled The Johnsons, memory 1 = living room, 2 = workshop, 3 = Mr.
Johnson's mobile telephone, 4 = Mrs. Johnson's mobile telephone. Arrival/Departure
password for button 01 is 333.
The family is leaving for holiday. They call the intercom
1.
A visitor presses the Johnsons' button – the intercom calls Mr. Johnson's mobile
2.
phone and, if unsuccessful, Mrs. Johnson's mobile phone.
2N TELEKOMUNIKACE a.s., www.2n.cz
3 for the Night mode. This is a simple two-number
3, 4, 5, 6
and enters
OFF , memory 1 is used for the
ON , memories 1, 2, 3, 4, 5, 6
are used for the Night mode
all buttons and this
and enters :
: 777 0
and enter :
777 1
333 1
65/78