Full Parameter Chart - Axis 2N Analog Force Installation Manual

3.2 Full Parameter Chart

All parameters are described in table below.
Parameter Parameter
(function) Name
011 to 016 Button 01
memories
011 to 046 Button 04
memories
Digits 0–9 can only be entered directly into the memories. Special characters are entered
additionally using function XX7:
017 Enter special
...
chars
047
and
pause
018 Button 01 to
... 04 count of
048 automatic
dialling
cycles
019 Button 01 to
... 04 Arrival
049 /Departure
password
2N TELEKOMUNIKACE a.s., www.2n.cz
Range Default
Up to16 blank
digits
Up to16 blank
digits
,
Button numbers 05–54: see note 1 above.
0-9 0 = off
up to 16 blank
digits
Note
Note 1: Button number 05–54 can be used to
store pre-programmed numbers, accessable via
keypad (enable parameter 922)
Button numbers 05–54: see note 1 above.
Button numbers 05–54: see note 1 above.
40/78