Scanning General Documents - Microtek Spector-AF10 User Manual

Scanning General Documents

This section is applicable to scanning general documents that do not require
security verification.
1. Please refer to the "Positioning Documents" section and place the document
to be scanned face down on the scanner glass surface.
2. Launch ScanWizard DI as a stand-alone program by clicking on the
ScanWizard DI icon on the desktop.
3. In the main interface, click the Scan Setup button to activate the Scan Setup
interface.
4. In the Scan Setup interface, follow the steps below to specify your basic
scanning settings.
a) Select "Flatbed" in the Scan Source as
your image input device.
b) Select the appropriate image type in the
Color Mode as your image output type.
c) Select "Visible Light" in the Multi-light
Sources as your light source for scanning.
d) Select a dimension in the Paper Size as
your preview image size.
e) Select a desired resolution in the
Resolution for your image output
resolution.
f) If necessary, select "Text Orientation
Recognition" in the Rotate to ensure
the scanned images in a readable
orientation. When it is selected, you can
select the preferred language used as an
identification in the options menu.
g) If "Auto-crop" & "Auto-deskew" is
selected, the scanner automatically
detects the size of the original image,
crops the full scan frame to fit the
image, and removes unwanted black
borders after the scan, as well as
corrects the distorted image for proper
alignment.
Spector-AF10 User's Manual 21