Customizing The Function Buttons - Microtek Spector-AF10 User Manual

Customizing the Function Buttons

1. Follow the steps in "Starting Up the Scanner Button Settings Interface" to
activate the Scanner Button Settings interface.
2. Follow the procedures (steps 4 through 8) for the "Scanning General
Documents" section to specify your scanning requirements in this interface.
When done, click "</>" to switch back to the "Scanner Button" panel.
3. In the panel, specify your requirements for the function button that you wish
to define.
a) Choose the function button (F1, F2,
F3, F4, F5, or F6) to define from the
Button options
b) Key in your preferred string in the
Label edit box for the selected
function button.
c) Make your selection among the
Function radio buttons below to
define your selected button. The four
functions provided are:
– Scan To: Captures images that
can be automatically saved
as files or sent to another
application for further processing.
This is the default selection.
– Copy: Scans the image and
sends it to your printer,
transforming your scanner and
printer into a convenient copy
station. Simply specify the
number of copies you want.
– Email: Captures images that can
be automatically saved as files or
sent to the system default E-mail
application.
– OCR: Performs OCR (Optical Character Recognition) of a document
and converts it to a fully editable digital file. Saves time from
retyping documents into your word processor.
d) Next, specify a file's name, saving location, and saving format for the
scanned images.
e) When done, click the Save button to save the parameters currently used
for the selected button.
Spector-AF10 User's Manual 39