How The Function Button Works - Microtek Spector-AF10 User Manual

4. To define another function button if desired, follow steps 2 through 3 of this
5. When done, click the OK button to exit the Scanner Button Settings
NOTE:
1. When you have finished the settings for the function buttons in the interface,
2. If ScanWizard DI is launched and the Main interface (AP control panel) is

How the Function Button Works

When you finish customizing the function buttons, follow the steps below to
perform the scanning task by pressing the button on the scanner. The scan
will be performed in accordance with the designated button function using the
parameters configured in the Scanner Button Settings interface.
1. Place the material to be scanned face down on the scan bed.
2. Exit the Scanner Button Settings interface.
3. Press one of the buttons on your scanner to activate the function associated
4. If necessary, specify new settings for the button. Follow the procedures
40 Spector-AF10 User's Manual
section.
Interface.
you have to exit interface before you perform the predefined scanning task
by pressing the function button on the scanner.
activated on the screen, the scanned image files will appear in the Thumbnail
View window for your viewing after you perform the scanning task by
pressing the function button on the scanner.
with the selected button easily.
When done, the scanned images will be automatically saved into the folder
defined in the "Scanner Button" panel.
(steps 1 through 5) for the "Customizing the Function Button" section to
specify your new requirements for the button that you wish to redefine.