AJAX Button S Jeweller Manual page 8

5. Add a compatible hub
internet access via Ethernet, Wi-Fi, and/or mobile network.
. Ensure the space is disarmed, and the hub is not starting an update by
checking statuses in the Ajax app.
This product line is developed for projects. Only accredited Ajax Systems partners can
install, and administer Superior products.
Connecting to the hub
1. Open the Ajax PRO app
2. Go to the Devices
3. Name the button, scan, or type in the QR code (placed on the button and the
package box), and select a room and a group (if
4. Press Add.
5. Hold the button for 7 seconds. When Button S is added, the LEDs will flash
green once.
Note that if the maximum number of devices has already been added to the hub
( depending on the hub model
one.
The button connected to the hub will appear in the list of hub devices in the Ajax
app.
Button S works with one hub. When connected to a new hub, the button stops
sending events to the old one. When added to a new hub, the button is not
removed from the device list of the old hub. This must be done through the Ajax
app.
Malfunctions
When a malfunction is detected, the Ajax app displays a malfunction counter on
the device icon. All malfunctions are shown in the button States. Fields with
malfunctions will be highlighted in red.
to the space. Ensure the hub is switched on and has
. Select the space where you want to add the button.
tab and click Add Device.
), you will be notified when you try to add a new
Group mode is enabled).