AJAX Button S Jeweller Manual page 12

Device No.
Settings
To change Button S settings in the PRO Ajax apps:
1. Go to the Devices
2. Select Button S from the list.
3. Go to Settings by clicking on the gear icon
4. Set the required parameters.
5. Click Back to save the new settings.
Parameter
Name
Room
Battery charge auto-check
Notify if the device was unreachable for 3 days
Operating mode
The number of the device loop (zone).
tab.
Name of the device. Can be changed.
The choice of the virtual room that the device is
assigned to.
If the toggle is enabled, the system checks the
battery state of the device once a day. If the
auto-check is disabled, the battery state
updates only when the device is pressed.
When the toggle is enabled, the user receives a
corresponding notification if the button has not
communicated with the hub for three days. The
setting is available when the Battery charge
auto-check toggle is enabled.
Selection of the operating mode of the button.
Three modes are available:
.
Value
The feature is available when the
button is connected to the hub
with firmware version OS
Malevich 2.17 or higher.