AJAX Button S Jeweller Manual page 15

00:00
The button status is indicated with red or green LED indicators.
Category
Adding to the system.
Command delivery indication.
Long press indication in
Control mode.
Feedback indication
(follows the Command
Delivery Indication).
Battery status
(follows Feedback Indication).
Indication
Green LED flashes 6 times.
Lights up green for a few
seconds.
Lights up green briefly.
Lights up red briefly.
Flashes green briefly.
Lights up green for about half
a second after the command
delivery indication.
Briefly lights up red after the
command delivery indication.
After the main indication, it
lights up red and goes out
smoothly.
00:03
Event
The button is not registered in
any system.
Adding a button to the system.
The command is delivered to
the system.
The command is not delivered
to the system.
The button recognized the
pressing as a long press and
sent the corresponding
command to the hub.
The system has received and
performed the command.
The system did not perform
the command.
The button battery needs to be
replaced. At the same time,
button commands are
delivered to the system.
Battery replacement