Control Mode - AJAX Button S Jeweller Manual

The type of alarm determines the event code sent to the CMS and the
notification text received by the user. This ensures an accurate response to the
threat.
Note that in Panic mode, pressing Button S will raise an alarm regardless of the
system security mode.
If Button S is pressed, an alarm can also run
The button can be installed on a flat surface or carried around. To install on a
flat surface (for example, under the table), secure Button S with double-sided
adhesive tape. To carry Button S on the strap: attach the strap to Button S using
the mounting hole in the Button S enclosure.

Control mode

Button S can be used to control
Button S has two pressing options: short and long (when the button is pressed
for over 3 seconds). These pressings can activate one or more automation
devices: Relay WallSwitch WaterStop LightSwitch ,
To bind an automation device action to a long or short press of Button S:
1. Open the Ajax app
2. Select Button S in the list of devices and go to settings by clicking the gear
icon .
3. Select the Control mode in the Operating mode section. Click on the actual
Button S device to save the changes.
4. Go to the Scenarios menu. Click Create Scenario if you are creating a
scenario for the first time, or Add Scenario if scenarios have already been
created in the system.
5. Select a pressing option to run the scenario: Short press or Long press.
. Select the automation device to execute the action.
automation devices
, ,
and go to the Devices
an automation scenario .
. In Control mode, the
, or Socket .
tab.