Cancelling Moves - LEXIBOOK CG1300 Instruction Manuals

If you press MOVE again, the computer will move again, so you can make the
computer play alone, against itself.
If you want to play the whole game as Black:
1. Press NEW GAME and place the white pieces at the top of the chessboard
and the black ones at the bottom. Remember that the White Queen always
starts on a white square and the Black Queen on a black square.
2. Then press MOVE to start the game. The computer will move a white
piece at the top of the chessboard and will wait for you to move with the
black pieces at the bottom.
XIV. CANCELLING MOVES
If you press the square from which you want to move a piece, but you decide in
the end that you want to make a different move, press the square again. The lights
indicating the coordinates of the square will come on and you can make another
move.
If you have made your move and the computer is thinking, or has already
illuminated the coordinates of the square it's going to move from:
1. Press TAKE BACK.
2. The computer will then interrupt it's thinking and illuminate the lights of
the square you last moved to. Press the square and pick up the piece.
3. The computer will then indicate the coordinates of the square you moved
from. Press this square and put the piece back on it.
4. If you want to cancel a capture or a capture en passant, the computer will
remind you to reinstate the captured piece on the chessboard by indicating
the coordinates of the square where the piece was. Press this square and
replace the piece on the chessboard.
5. If you cancel after you have castled, you must first replace your King, then
your Castle by pressing the squares of each.
6. If you cancel the promotion of a pawn, don't forget to change your Queen
back to a pawn.
If you want to cancel your move, but you have already carried out the computer's
next move, press TAKE BACK and cancel the computer's move following the
CG1300 -1350-F/GB/P/I/E 40
40
17/03/04, 10:20