Section 2: General Information; Introduction; Features; Standard Features - Generac Power Systems Power Zone 410 Owner's Manual

Section 2: General Information

Introduction

The Power Zone 410 Control Panel is an electronic con-
trol box that functions as an advanced standby generator
controller.
Specialized programs are built into the Power Zone 410
Control Panel to allow customers to configure spare I/O
(inputs/outputs) to their own needs. Some pre-defined
functions can be user customized from measurements to
alarms to special functionality.

Features

The Generac Power Zone Digital Control Platform is a
fully integrated and multipurpose family of controllers for
Generac's generator systems.

Standard Features

• 128 x 64 Graphical Display with Heater
• Multi-Lingual
• Full System Status
• Three-Phase Sensing Digital Voltage Regulator
• Full Range Standby Operation
• Full System Status
• Three-Phase AC Volts
• Three-Phase Amps
• kW
• Power Factor
• Oil Pressure
• Water Temperature
• Oil Temperature*
• Oil Level*
• Fuel Pressure and Level
• Engine Speed
• Battery Voltage
• Alternator Frequency
• Time
• Date
• Line Power and Gen Power
• Run Hours
• Service Reminders
• Fault History (Alarm Log)
• Remote Communications
• Programmable Auto Crank
Power Zone 410 ® Controller Owner's Manual
• Emergency Stop
• On/Off Manual Switch
• Not in Auto Flashing Light
• Selectable Low Speed Exercise
• NFPA 110 Capable**
• 5 A Integrated Battery Charger***

Standard Protections

• Low Oil Pressure
• Low Coolant Level
• High/Low Coolant Temperature
• Oil Temperature
• Over/Under Speed
• Over/Under Voltage
• Over Frequency
• Over Current
• Over Load
• Battery Voltage
• Battery Charger Current
• Phase-to-Phase and Phase-to-Neutral Short Cir-
cuits (I 2 T Algorithm)
• Ground Fault
• Electrical Fan Protection*
• Loadshed
• Field Calibration for Voltage and Current
* If equipped; when available
** See modular NFPA 110 components section
*** Operation disabled when optional 10A Battery Charg-
er is installed

Display

• Easy Menu Structure
• Multi-Lingual
• On Screen Editable Parameters
• Key Function Monitoring
• Three-Phase Voltage, Amperage, kW, kVa, and
kVAr
• Average or
Measurements
• Frequency
• RPM
• Engine Coolant Temperature
General Information
Line to Neutral Voltage
9