Info Screen; Alarm Log" Sub-Page; Run Log" Sub-Page; Maintenance Log" Sub-Page - Generac Power Systems Power Zone 410 Owner's Manual

Info Screen

The pages within the Info Screen contain information for
viewing only. Use the navigation arrows (
gate between the screens.
See Figure 2-26. Page 1 displays the alarm log, run log,
maintenance log, and general information about the gen-
erator, battery condition, hardware/firmware version, and
I/O Extender versions.
Figure 2-26.
04/19/21 08:40PM 88F
Alarm Log
Run Log
Maintenance Log
General
Figure 2-26. Info Screen (Page 1)

"Alarm Log" Sub-Page

See Figure 2-27. Use this page to view a list of alarms
and warnings that have been triggered organized by time
and date.
Figure 2-27.
Alarm Log:
01: 04/19/21
Very Low Battery
ECODE
Figure 2-27. Alarm Log

"Run Log" Sub-Page

See Figure 2-28. Use this page to view a list of run occur-
rences organized by time and date.
Power Zone 410 ® Controller Owner's Manual
) to navi-
013016
10:59pm
2751
013017
Figure 2-28.
Run Log:
01: 04/19/21
Stopped With Alarm
Figure 2-28. Run Log

"Maintenance Log" Sub-Page

See Figure 2-29. Use this page to view a list of mainte-
nance occurrences organized by time and date.
Figure 2-29.
Maintenance Log:
01:
No Log To Display
Figure 2-29. Maintenance Log
"General Info" Sub-Pages
See Figure 2-30. Use page 1 to view generator status,
serial number, and run hours.
Figure 2-30.
General Info
Generator:
Serial No:
Run Hours
Figure 2-30. General Info (Page 1)
See Figure 2-31. Use page 2 to view battery condition.
General Information
10:59pm
013018
013019
NOT ACTIVATED
SERVICE UNIT
xxx:xxh:m
013020
17