Declaration Of Conformity - Advantech UNO-148 V2 Startup Manual

Specifications (Cont.)
Power Requirements
• Power type: AT
• Power Input Voltage: 10 ~ 36 V
• Power Connector: 1 x 2-pin terminal block
• Minimum Power Input: 12V
This product is intended to be supplied by a UL certified
power supply or UL certified DC source rated 19Vdc, 4.74A
minimum, TMA 50°C minimum (Safety certificate operation
temperature 40°C), if you need further assistance, please
contact Advantech for further information.
Environment
• Operation Temperature: TDP@15W, -20°C~60°C (-40°F
~140°F with 0.7 m/s airflow)
• Storage Temperature: -40 ~ 85°C (-40 ~ 185°F)
• Relative Humidity: 95% RH @ 40 °C/104 °F, non-
condensin
Physical Characteristics
• Dimensions (W x H x D): 53 mm x 200 mm x 140 mm
• (1.4 in x 4.1 in x 5.9 in)
• Weight: 1.8 kg (3.96lb)
Battery
The computer is supplied with a battery-powered realtime
clock circuit. There is a danger of explosion if battery is
incorrectly replaced. Replace only with same or equivalent
type recommended by the manufacturer. Discard used bat-
teries according to manufacturer's instructions.

Declaration of Conformity

This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired opera-
tion.
Warning: To avoid electromagnetic interference, this prod-
uct should not be installed or used in residential
environments.
2 UNO-148 V2 Startup Manual
DC
5A, 24V 2.5A
DC DC
System I/O Interface
Simple Maintenance Process
NVME Installation
1. Remove the two screws from the bottom cover.
2. Secure the heatsink and NVME bracket with screws.