Safety Instructions - Advantech UNO-148 V2 Startup Manual

Simple Maintenance Process (Cont.)
5. iDoor extension slot: lock 2 screws on iDoor cover.
6. Secure the screws on bottom cover.
Din-Rail
1. Hang up the Din Rail and buckle inwards.
6 UNO-148 V2 Startup Manual
Simple Maintenance Process (Cont.)
2. Pull down the Release Latch for disassembly using a
screwdriver.

Safety Instructions

1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect the equipment from all power outlets before
cleaning. Use only a damp cloth for cleaning. Do not
use liquid or spray detergents.
4. For pluggable equipment, the power outlet socket must
be located near the equipment and be easily acces-
sible.
5. Protect the equipment from humidity.
6. Place the equipment on a reliable surface during instal-
lation. Dropping or letting the equipment fall may cause
damage.
7. The openings on the enclosure are for air convection.
Protect the equipment from overheating. Do not cover
the openings.
8. Ensure that the voltage of the power source is correct
before connecting the equipment to a power outlet.
9. Position the power cord away from high-traffic areas.
Do not place anything over the power cord.
10. All cautions and warnings on the equipment should be
noted.
11. If the equipment is not used for a long time, discon-
nect it from the power source to avoid damage from
transient overvoltage.
12. Never pour liquid into an opening. This may cause fire
or electrical shock.
13. Never open the equipment. For safety reasons, the
equipment should be opened only by qualified service
personnel.
14. If any of the following occurs, have the equipment
checked by service personnel:
• The power cord or plug is damaged.